E355JR/SM490AW/SM520C(Hot Roll) Low-Alloy Steel Covered Arc Welding
Electrode 7015 6013
welding Fluxes | Welding Consumables | Products & Solutions |
ESAB noach group limited
Place of Origin:
Shandong, China (Mainland)
AWS E6013,AWS E7018,AWS 6011,AWS 6010
Suitable for welding important structures made of low alloy steel.
Packaging & Delivery
5kg/box, 4box/carton,or as customer requirement
AWS E6013 Welding Electrodes
AWS E6013 is a low-carbon steel electrode with a high titaniume
coating and can be used on A . C . or D . C . It has excellent
welding technological properties. The arc is stable . The spatter
is small. The slag viscosity is moderate. It can be used freely .
The slag is easy to clean . The welded seam is smooth and fine and
easy to restrike the arc.
Suitable for welding sheet metal structure made of low-carbon steel
, such as ships, vehicles, building, and general machinery.
Low-alloy Steel Electrode AWS E7015-G GB E5015-G
Introduction: J507NiTiB is a kind of high toughness low-alloy steel electrode
with low-hydrogen natrium type coating. The deposited metal
contains Ni-Ti-B. It has excellent low temperature impact toughness
and welding performance. DCRP (Direct Current Reversed Polarity).
Uses: Used for welding ships, boilers, mine construction machinery,
ocean engineering structures and other key structures.
Chemical Composition of Deposited Metal (%)
Mechanical Properties of Deposited Metal
Diffusible Hydrogen Content in Deposited Metal: ≤5.0ml/100g(Chromatography or Mercury Method)
X-ray Radiographic Inspection: Degree 1
Reference Current (DC+)
Welding Current (A)
1.The electrodes must be baked under about 400°C for an hour before
welding, and used as soon as baking is completed.
2.The stains on the weldments, such as rust, oil stains, moisture,
etc., must be cleared away before welding.
3.When welding, short arc must be used and stringer bead is
H OH HF F VU